What are the significant differences between industrial fans and traditional plant ventilation equipment? First, we shall introduce several other plant ventilation equipment.
1. Central air conditioning
Central air conditioning refers to the use of large capacity compressor for refrigeration that make water as refrigerant or directly transfer the cool air inside. According to its outdoor heat dissipation mode and indoor heat exchange form, it can be divided into water-cooled chiller, water-cooled air cabinet, air-cooled chiller, air-cooled air cabinet, etc. However, the energy consumption of central air conditioning is particularly high, which will increase a lot of costs for ordinary enterprises. Moreover, central air conditioning has high requirements for temperature and humidity and no bad smell in the workshop, which limits the installation of a large part of the plant.2. Air cooler
The cooling principle of the air cooler is to make the outdoor fresh air enter the room through the pad. When the flowing air passes through the pad, the water in the water film will absorb the heat in the air and then evaporate, taking away a large amount of latent heat, so as to reduce the temperature of the air passing through the water pad, achieving the purpose of cooling. The air cooler has high requirements for installation position and layout, and the coverage range is very small. Because the cold air brought by the air cooler has a certain humidity, long-term use will cause mildew in the plant, so it will have a negative impact on some mechanical equipment, food and drug industries.3. Evaporative cooling pad with negative-pressure air fan
The combination of evaporative cooling pad and negative-pressure air fan is also the choice of many new plants. However, the pad wall will occupy most of the windows on one side of the wall, affecting the daylighting and increasing the lighting cost and the discomfort of personnel under unnatural light. In addition, the poor internal and external appearance of large-area water pad will affect class and image of the plant. In the process of use, the wind and sand can affect the indoor through the water pad. A large area of water pad is unsanitary after being dirty for a period of time. The floating phenomenon of water pad is generally difficult to avoid, which will have an impact on the workshop.It can be seen that the traditional plant ventilation equipment can not be fully applicable to all plants due to the limitations of equipment itself or service conditions. And the industrial fan is a new type of ventilation and cooling equipment for industrial plants.
Vanse has been focusing on the research and development of new industrial fans for 9 years, with a professional R & D base and plant, and has a number of invention patents. Vanse industrial fan uses its streamlined blades to minimize the air resistance, so that the electric energy can be transformed into air kinetic energy with the maximum efficiency. The air flow is pushed vertically to the ground, and an air flow layer is formed on the ground, forming a super large coverage area not limited to the lower part of the industrial energy-saving fan. Under the industrial energy-saving fan, you will feel the three-dimensional air supply from all directions that covers the whole body and all corners of the ground, so as to maximize the water evaporation surface, forming a breeze system similar to nature. Varying from applications in various occasions, the wind speed range can be adjusted arbitrarily from 3.3ft/s to 16.4ft/s to meet the use of various occasions. In an open space, a fan can even cover a large area of more than 16,146 ft2. It is a ventilation and cooling product unmatched by other ventilation systems.
jed@vansefans.com
